PEEK Rod | PEEK Rod Manufacturers

PEEK Rods Grade

Unfilled PEEK ROD

peek 450g rod is is made by PEEK pure resin, it has high impact strength and high toughness. 
(brownish gray/earthy yellow) is made from pure polyether ether ketone resin, which is the highest Performing, toughest and most impact resisting of all PEEK grades. It is the unique fact that pure PEEK can be sterilized through convenient sterilization tactics such as, steam, dry heat, ethanol, and y-rays and the raw material used in the preparation of PEEK is responsive to basic food hygiene standards of the European union and U.S froda which makes it very suitable for very common application such in the medical, pharmaceutical, and food processing industries.

Glass Filled PEEK ROD

PEEK 450Gl30 It is a glass fiber reinforced grade plastic containing 30 percent glass fiber than PEEK has higher rigidity and better creep resistant dimensionally stable parts for the manufacture of structural parts. Up to high temp, for long durations for bearing fixed loads. When used as a sliding part the suitability of PEEK5600GL30 must be considered as the glass fibers in the material damaging the surfaces it comes into contact with.

Carbon Fiber PEEK ROD (CF PEEK ROD)

Through imported PEEK 450ca30 rod for black material containing 30% of carbon fiber reinforcement, and compare with PEEK 450Gl30 has better mechanical properties (the modulus of elasticity, mechanical strength, creep characteristics), more wear-resistant, and then carbon fiber reinforced plastic than PEEK general unreinforced plastic has 3. The heat generated is dissipated from the bearing surface and it was clarified that it was five times faster than the thermal conductivity of a conventional material.

ESD PEEK ROD

ESD PEEK rod can a protect people or other objects from the danger of voltage discharge. According to static electricity control and permanent discharge of static charges, this kind of plastic can offer high class security to application fields.

Ast PEEK ROD

AST PEEK rod is derived from PEEK raw material and contains carbon fiber in it. such as carbon black, metal fber, metal powder, permanent antistatic masterbatch and so on to get the function of ACT conductivity and electromagnetic interference shielding.

Peek Rod Application Areas

PEEK is widely used in several industries, here are some specific examples of applications: PEEK is commonly used in several industries, here are some specific examples of applications:

• Aerospace:

Employed in constructing structural parts for aircraft, particularly for the engines and coupling systems.

• Medical devices:

PEEK Rod for medical applications particularly for spinal implants and other joint prostheses exhibit high performance and is thus used for surgical instruments such as implants.

• Automotive industry:

P is utilized to produce high-temperature products for vehicles, valve seats, and housing for sensors that can endure high temperature and chemical erosion.

• Electronics industry:

Some of the applications of PEEK include electrical insulation parts and connectors.

Peek Rod Purchase and Supply

Zhejiang BW Industry has a production capacity of PEEK rods manufacturers, which are very suitable for pressing Ф4-300mm a large number of PEEK rods stock.
As for the PEEK rods which are provided and manufactured by Zhejiang BW Industry, the PEEK molds are characterized by no black spot, good toughness, favorable price, smooth surface, and other superior performance and ease of processing, and are completely capable of fully replacing Victrex rods as it is testified by the third party quality check.

PEEK RODS Maintenance and handling

The maintenance of PEEK is relatively simple, but still need to pay attention to the following points in use: The maintenance of PEEK is relatively simple, but still need to pay attention to the following points in use:

• Cleaning:

Do not use very corrosive solutions such as strong acids or bases to clean PEEK parts to prevent the degradation of the surface of the part as well as its performance.

• Processing:

With PEEK, you can achieve injection molding, milling and turning, etc;

For the manufacturing of complex shape parts, if you need CNC machining, we can also provide appropriate services.

PEEK ROD Storage:

It is more important for PEEK materials to be stored in a dry place and cool environment as this will reduce the chances of absorbing moisture and thus the formation of a deformed structure.

PEEK RODS TABLE