Unfilled PEEK Pipe does not contain any fillers and has quite reasonable mechanical properties and good chemical resistance. The DLC-coated tool is ideally suited to high temperatures and its continuous use temperature can be up to 260 °C.
Unfilled PEEK Pipe applicable to automotive and aerospace components electronic products, and medical equipment, which demand high mechanical strength and thermal stability.
Glass filled PEEK Pipe is a high-strength material with 30% glass fiber added to this material which substantially contributes to its rigidity, strength, and creep resistance.
It has also revealed more favorable values of heat deflection temperature and elastic modulus.
Glass filled PEEK Pipe applicable for productions that require high load and high-temperature systems such as mechanical components, structural components, and high-performance seals.
Carbon Filled PEEK Pipe also has the additives of 30% carbon filler which increases its stiffness and creep ability and also increases its thermal stability and strength. Its frictional characteristics are also tailored for the sort of rubbing work it is to do.
Carbon Filled PEEK Pipe applied in elements having less sliding velocity and also deep grooves, gears, piston rings, valve seats, and other subjects having high resistance to wear.
In extrusion, PEEK tubes with a constant and defined cross section can be produced.
With the help of advanced extrusion technology, the molten PEEK tube is automatically extruded through the mold.
Due to the thermal expansion and contraction effect, the extruded pipe will have a certain tolerance.
At the same time, since the outer surface is first cooled and contracted, the inside is still at a high temperature, and it needs to be baked in a high-temperature oven at 260 degrees Celsius for more than 36 hours to ensure that the performance of the inside and the outside can be maintained.
Beige, black
Outer diameter -2mm, inner diameter +2mm
Each peek pipe is completely packed in bubble bags and then packed into cartons.
We have more peek pipe sizes, which are divided into large, medium and small according to the pipe size. If you want a customized size, we accept it.
[table id=14 /]
